Dana 30 Torque Specs
Dana 30 Torque Specs. 100 ft*lb (10) differential cover bolt torque: Thanks for your info in advance.
Torque specs for those bolts. (i just put a locker in tehe! I obtained an axle seal leak recently and finally got tired of it dripping on my drive way.
I Am Ready To Torque The Carrier Cap Bolts Down.
Ring gear to case bolts: And the larger ones to 80 ft/lbs. Trying to find the torque specs for the bearing caps and ring gear bolts.
Dana 30 Ring Gear Torque Specs.
Does anyone know the torque specs for that pinion nut? (i just put a locker in tehe! The most current information can be found on dana.com/cv.
$1,349.95 Rcv Performance Ultimate Cv Axles Feature A Constant Velocity Joint With Chromoly Shafts And Internal Components To Give You Maximum Strength And Smooth Torque.
80 ft*lb (3) hub bearing bolt torque: I don't know for sure if the yj's use a collapsible spacer on the pinion but if it does you want to spinn the yoke when you tighten it and recheck so you do not overtighten it and burn up the bearings or better yet check running torque with a inch/pound beam or dial style torque wrench for used bearings with the wheels of the ground you should have a reading of about 20. 100 ft*lb (10) differential cover bolt torque:
Torque It Down In 10 Ft/Lb Increments Up To The Specified Torque In A Criss Cross Pattern.
I obtained an axle seal leak recently and finally got tired of it dripping on my drive way. I also just relized that this should be in the oem. Unfortunately i have to replace my pinion seal and put a new yoke on.
All The Thing On The Net Contradict Each Other And I Would Like To Get It Right.
(5) check the bearing preload. 45 to 65 ft lbs. And make sure the mating surfaces are clean.
Post a Comment for "Dana 30 Torque Specs"