Skip to content Skip to sidebar Skip to footer

Widget HTML #1

2007 Dodge Charger Rt Rear End Gear Ratio

2007 Dodge Charger Rt Rear End Gear Ratio. The ratio 3.08 means 3.08 revolutions on one end (the drive shaft) equals 1 revolution on the other side (in this case the output shafts connected to the rear wheels). Autos only come with the 3.06 gears.

2015 Sxt With 3.90 Rear Axle Option | Dodge Challenger Forum
2015 Sxt With 3.90 Rear Axle Option | Dodge Challenger Forum from www.challengerforumz.com

Second, you chose wisely in my opinion, by going with the ss/t option group on the v6 rallye. Most suppliers advertise the 215mm gears for the 6.1 yet the manual says the 09' 5.7 auto's have the 215mm. I have a 2007 charger 5.7 rt with 2.82 rear gears.

However, The Mileage Will Definitely Sacrificed (In General).


I did some calculations and a 5 speed nag1 automatic with a 3.59 1st gear and a 3.90 rear ratio would be equivalent in first gear to a classic mopar muscle car with a 4 speed and a 5.28 rear end ratio. To me anyway, that makes sense, as long as axle ratio means rear end gear. #3 · nov 24, 2011.

What Is The Stock Rear End Gear Ratio.


You could order many different gear ratios in the 69 charger from the factory, a stock 318 charger mostly had a 2.76 ratio but you could order 3.23, 3.55, 3.90, 4.10, or a 4.56 gear if you so wished. Second, you chose wisely in my opinion, by going with the ss/t option group on the v6 rallye. Well looky here ) i just stumbled across this accidentally.

#14 · Dec 28, 2017.


(2.62 x 125 x 1.29 x 336)/28.7=4,946 rpm. Style name 4dr sdn r/t rwd. Dodge charger 2007, rear street gear ring and pinion gear set by richmond®.

Chrysler Dodge Differential Gasket Patterns Can Help You Indentiy What Rear End You Have.


Richmond gear ring and pinions are perfect for any vehicle where performance and durability matters. Pumpkin, axle, hubs, and rear section of d/s. You will get no traction in first gear and it will shift into 2nd pretty quickly.

Rear Axle Ratio X Mph X Transmission Output Ratio X 336/ Tire Diameter.


A buddy sent me a motortrend article comparing the 2006 charger and mustang. The stamped numbers on the left or right axle tube can also identify the axle. Dodge charger with 215 mm ring gear 2007, rear axle differential seal by national®.

Post a Comment for "2007 Dodge Charger Rt Rear End Gear Ratio"